Custom Embroidery Services in Surrey, BC

Yes! 3D puff is great for hats. It adds a foam layer under the stitches to make the design pop out.

Yes, but we must inspect them first. Some materials (like heavy leather or very thin silk) might not work with our machines.

We recommend text be at least 0.25 inches tall. Anything smaller becomes a thread blob and isn’t legible.

Custom embroidery has no minimum (1 piece is fine). A one-time setup fee covers creating your stitch file, so very small runs cost more per piece. Larger runs spread that fee and reduce the cost per piece.

Embroidery is generally more durable than screen printing on high-use garments because the design is stitched directly into the fabric rather than applied as ink on top. It does not peel, crack, or fade the same way a printed design can over time. This makes it a strong choice for uniforms, workwear, and caps that go through frequent washing. For garments where longevity and a premium finish matter, embroidery is often the preferred option.

Embroidery works best on structured, stable fabrics like polos, caps, jackets, tote bags, and fleece. These materials hold their shape under the stitching tension and produce clean, well-defined designs. Very thin or stretchy fabrics like lightweight t-shirts or athletic wear can be more challenging because they may distort under the needle. For those garment types, screen printing or DTF is usually a better fit.

Digitizing is the process of converting your logo or artwork into a stitch file that the embroidery machine can read. The quality of the digitizing directly affects how clean and accurate the final embroidered design looks. A poorly digitized file can result in thread gaps, misaligned edges, or stitching that does not match the original artwork. Good digitizing accounts for stitch density, direction, and underlay to produce the best possible result on the specific garment type being used.

Most standard embroidery designs use between one and eight thread colors. More colors are possible but add complexity and can increase production time. Photographic or gradient-heavy artwork is generally not well-suited for embroidery because thread cannot replicate subtle color transitions the way ink can. Simple, bold logos with defined color areas translate best and give the cleanest results. If your design has many colors, we can advise on simplification during the digitizing stage.

Yes, caps are one of the most common items we embroider. Structured caps with a firm front panel are the easiest to work with and produce the cleanest results. Unstructured or very soft caps can sometimes cause slight distortion, but experienced digitizing and backing material help minimize this. Front, side, and back placements are all possible depending on the cap style and brim shape. Caps with embroidery are a popular choice for teams, events, and corporate gifting.

Embroidered garments should be washed in cold water on a gentle cycle. Turning them inside out before washing helps protect the stitching from friction with other items. Avoid bleach and high heat drying, as these can weaken the thread and backing material over time. With proper care, embroidered designs are extremely long-lasting and maintain their appearance through many wash cycles.

Yes, the same digitized logo file can be applied across multiple garment types, but the stitch size and density may need to be adjusted for each application. A logo that works well on a polo chest will need to be resized for a cap front or a jacket sleeve. These adaptations are standard practice and are handled during the digitizing or setup stage. Using one consistent logo across different garments keeps your branding unified while the application is optimized for each item type.